HomeGuru4.3.0 - App Store
You'll be able to see results in few seconds.
Publisher Description
If you have a SmartLinc INSTEON controller from SmartLabs (part #2412N, not an INSTEON Hub), HomeGuru is the perfect way to control your home's lights and appliances. It allows you to view a list of all configured scenes in your house, view their status and control them by sending on, off or fade commands to them. It is much quicker and friendlier than using the web interface to the device, especially if you use authentication.
HomeGuru supports all the devices the SmartLinc knows about automatically, no further configuration is necessary.
IMPORTANT: HomeGuru supports SmartLinc firmware version 3.0 (iPhone 2.0). It is known to work with 2.8 without device status. (To check your version, look for Firmware Version under the General Settings.) Make sure you have a supported version before purchasing. If you have communication problems with your SmartLinc, please contact us for assistance or send an error report under your controller in settings.
Version History Stability fixes 4.3.0 Aug 9 Updated for newer devices. 4.2.0 09/02/2025 Bug fix to handle newer ISY devices. 4.1.0 05/30/2022 Support for dark mode. 4.0.1 11/11/2019 Updated for iOS 10 4.0.0 09/17/2016 iPhone 5 support
Fix for SmartLinc thermostat control 3.0.4 03/06/2013 Updated graphics for the new iPad. 3.0.3 03/22/2012 Bug fixes.
Fixed detection of ISY controller. 3.0.2 12/03/2011 Bug fixes with finding weather locations and detecting controllers. There's a new option to open links in Safari if you have trouble with the built in browser. 3.0.1 08/19/2011 New mode to use the raw interface on the SmartLinc (set port to 9761).
New iPad interface that allows more scenes to be changed at once.
Better handling for embedded folders on the ISY controller.
Rooms can now be collapsed.
Enabled multitasking.
Bug fixes, including a crash when adding a controller with 2.8 firmware and errors when viewing links. 3.0 04/26/2011 Added options to scale the browser for viewing links and to reload all devices at startup. The link viewer now supports authentication. Several bug fixes with loading data from the SmartLinc. 2.0.3 01/21/2011 The thermostat will now allow you to set both heat and cool temperatures in "Auto" mode.
Device errors will appear in the devices status area instead of in an alert box.
Other bug fixes. 2.0.2 12/10/2010 Added new mode for pre-3.0 SmartLinc controllers to improve compatibility. This requires a reload of devices, which will be done automatically after upgrading.
All scenes with the same status device will now be updated simultaneously when any one of them are updated.
Dimable scenes that support status will now highlight their "off" label when turned off (iPhone only). 2.0.1 10/19/2010 Version 2.0 is much improved with a new, faster to navigate user interface with all common controls on one screen. It also adds support for the Universal Device's ISY series of INSTEON controllers in addition to the SmartLinc. This version supports thermostats (yes, plural), direct-dimming, retina display and an interface enhanced for iPad. 2.0 10/05/2010 Bug fixes for SmartLinc Firmware 2.8. 1.0.2 02/02/2010 Fixes to support older SmartLinc controllers (Firmware 2.8). 1.0.1 12/28/2009 1.0 12/16/2009
About HomeGuru
The company that develops HomeGuru is Scott Jann. The latest version released by its developer is 4.3.0.
To install HomeGuru on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-14 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the HomeGuru as malware if the download link is broken.
How to install HomeGuru on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the HomeGuru is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After HomeGuru is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
Program Details
System requirements
Download information
Pricing
Version History
version 4.3.0
posted on 2026-10-14
Version History Stability fixes 4.3.0 Aug 9 Updated for newer devices. 4.2.0 09/02/2025 Bug fix to handle newer ISY devices. 4.1.0 05/30/2022 Support for dark mode. 4.0.1 11/11/2019 Updated for iOS 10 4.0.0 09/17/2016 iPhone 5 support
Fix for SmartLinc thermostat control 3.0.4 03/06/2013 Updated graphics for the new iPad. 3.0.3 03/22/2012 Bug fixes.
Fixed detection of ISY controller. 3.0.2 12/03/2011 Bug fixes with finding weather locations and detecting controllers. There's a new option to open links in Safari if you have trouble with the built in browser. 3.0.1 08/19/2011 New mode to use the raw interface on the SmartLinc (set port to 9761).
New iPad interface that allows more scenes to be changed at once.
Better handling for embedded folders on the ISY controller.
Rooms can now be collapsed.
Enabled multitasking.
Bug fixes, including a crash when adding a controller with 2.8 firmware and errors when viewing links. 3.0 04/26/2011 Added options to scale the browser for viewing links and to reload all devices at startup. The link viewer now supports authentication. Several bug fixes with loading data from the SmartLinc. 2.0.3 01/21/2011 The thermostat will now allow you to set both heat and cool temperatures in "Auto" mode.
Device errors will appear in the devices status area instead of in an alert box.
Other bug fixes. 2.0.2 12/10/2010 Added new mode for pre-3.0 SmartLinc controllers to improve compatibility. This requires a reload of devices, which will be done automatically after upgrading.
All scenes with the same status device will now be updated simultaneously when any one of them are updated.
Dimable scenes that support status will now highlight their "off" label when turned off (iPhone only). 2.0.1 10/19/2010 Version 2.0 is much improved with a new, faster to navigate user interface with all common controls on one screen. It also adds support for the Universal Device's ISY series of INSTEON controllers in addition to the SmartLinc. This version supports thermostats (yes, plural), direct-dimming, retina display and an interface enhanced for iPad. 2.0 10/05/2010 Bug fixes for SmartLinc Firmware 2.8. 1.0.2 02/02/2010 Fixes to support older SmartLinc controllers (Firmware 2.8). 1.0.1 12/28/2009 1.0 12/16/2009
version 4.3.0
posted on 2026-08-10
Version History Stability fixes 4.3.0 1d ago Updated for newer devices. 4.2.0 09/02/2025 Bug fix to handle newer ISY devices. 4.1.0 05/30/2022 Support for dark mode. 4.0.1 11/11/2019 Updated for iOS 10 4.0.0 09/17/2016 iPhone 5 support
Fix for SmartLinc thermostat control 3.0.4 03/06/2013 Updated graphics for the new iPad. 3.0.3 03/22/2012 Bug fixes.
Fixed detection of ISY controller. 3.0.2 12/03/2011 Bug fixes with finding weather locations and detecting controllers. There's a new option to open links in Safari if you have trouble with the built in browser. 3.0.1 08/19/2011 New mode to use the raw interface on the SmartLinc (set port to 9761).
New iPad interface that allows more scenes to be changed at once.
Better handling for embedded folders on the ISY controller.
Rooms can now be collapsed.
Enabled multitasking.
Bug fixes, including a crash when adding a controller with 2.8 firmware and errors when viewing links. 3.0 04/26/2011 Added options to scale the browser for viewing links and to reload all devices at startup. The link viewer now supports authentication. Several bug fixes with loading data from the SmartLinc. 2.0.3 01/21/2011 The thermostat will now allow you to set both heat and cool temperatures in "Auto" mode.
Device errors will appear in the devices status area instead of in an alert box.
Other bug fixes. 2.0.2 12/10/2010 Added new mode for pre-3.0 SmartLinc controllers to improve compatibility. This requires a reload of devices, which will be done automatically after upgrading.
All scenes with the same status device will now be updated simultaneously when any one of them are updated.
Dimable scenes that support status will now highlight their "off" label when turned off (iPhone only). 2.0.1 10/19/2010 Version 2.0 is much improved with a new, faster to navigate user interface with all common controls on one screen. It also adds support for the Universal Device's ISY series of INSTEON controllers in addition to the SmartLinc. This version supports thermostats (yes, plural), direct-dimming, retina display and an interface enhanced for iPad. 2.0 10/05/2010 Bug fixes for SmartLinc Firmware 2.8. 1.0.2 02/02/2010 Fixes to support older SmartLinc controllers (Firmware 2.8). 1.0.1 12/28/2009 1.0 12/16/2009
version 4.2.0
posted on 2026-07-23
Version History Updated for newer devices. 4.2.0 09/02/2025 Bug fix to handle newer ISY devices. 4.1.0 05/30/2022 Support for dark mode. 4.0.1 11/11/2019 Updated for iOS 10 4.0.0 09/17/2016 iPhone 5 support
Fix for SmartLinc thermostat control 3.0.4 03/06/2013 Updated graphics for the new iPad. 3.0.3 03/22/2012 Bug fixes.
Fixed detection of ISY controller. 3.0.2 12/03/2011 Bug fixes with finding weather locations and detecting controllers. There's a new option to open links in Safari if you have trouble with the built in browser. 3.0.1 08/19/2011 New mode to use the raw interface on the SmartLinc (set port to 9761).
New iPad interface that allows more scenes to be changed at once.
Better handling for embedded folders on the ISY controller.
Rooms can now be collapsed.
Enabled multitasking.
Bug fixes, including a crash when adding a controller with 2.8 firmware and errors when viewing links. 3.0 04/26/2011 Added options to scale the browser for viewing links and to reload all devices at startup. The link viewer now supports authentication. Several bug fixes with loading data from the SmartLinc. 2.0.3 01/21/2011 The thermostat will now allow you to set both heat and cool temperatures in "Auto" mode.
Device errors will appear in the devices status area instead of in an alert box.
Other bug fixes. 2.0.2 12/10/2010 Added new mode for pre-3.0 SmartLinc controllers to improve compatibility. This requires a reload of devices, which will be done automatically after upgrading.
All scenes with the same status device will now be updated simultaneously when any one of them are updated.
Dimable scenes that support status will now highlight their "off" label when turned off (iPhone only). 2.0.1 10/19/2010 Version 2.0 is much improved with a new, faster to navigate user interface with all common controls on one screen. It also adds support for the Universal Device's ISY series of INSTEON controllers in addition to the SmartLinc. This version supports thermostats (yes, plural), direct-dimming, retina display and an interface enhanced for iPad. 2.0 10/05/2010 Bug fixes for SmartLinc Firmware 2.8. 1.0.2 02/02/2010 Fixes to support older SmartLinc controllers (Firmware 2.8). 1.0.1 12/28/2009 1.0 12/16/2009
version 4.2.0
posted on 2025-09-02
Updated for newer devices.
version 4.2.0
posted on 2025-09-02
Sep 2, 2025
Version 4.2.0
Updated for newer devices.
version 4.1.0
posted on 2022-05-30
May 30, 2022 Version 4.1.0
Bug fix to handle newer ISY devices.
version 4.0.1
posted on 2019-11-11
11 Nov 2019 Version 4.0.1
Support for dark mode.
version 4.0.1
posted on 2019-11-11
Nov 11, 2019 Version 4.0.1
Support for dark mode.
version 4.0.0
posted on 2009-12-16
version 4.0.1
posted on 1970-01-01
11 de Nov de 2019 Version 4.0.1
Support for dark mode.
Disclaimer
Official App Store Link
We do not host HomeGuru on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for HomeGuru is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
